Hantek DSO2000 Series -Cost-effective economy oscilloscope, 150MHz Bandwidth, 1GSa/s, 8M memory depth; with 1CH 25MHz waveform generator, support arbitrary waveform output; 14 kinds of trigger modes, standard with 5 kinds of serial protocol triggers and decodes; 32 kinds of auto measurements with statistics; 3-digit digital voltage meter and 6-digit hardware frequency indicator functions; 2 sets of DVM; Abundant SCPI remote command control. It is a useful commissioning instrument for various fields such as communication, aerospace, embedded systems, computers, research and education.
Feature:
1) 2 channels which are respectively controlled by independent knobs
2) 100 MHZ and 150MHZ analog channel bandwidth
3) Sampling rate up to 1 GSa/s
4) 8M memory depth
5) Vertical range 2mV/div ~ 10V/div
6) Built-in 1 CH 25MHz waveform generator (DSO2D10, DSO2D15)
7) Vertical resolution: 8bit
8) Trigger: Edge, Pulse, Video, Slope, Overtime, Window, Pattern, Interval, Under Amp, UART, LIN, CAN, SPI, IIC
9) BUS decode and protocol analysis: RS232/UART, I2C, SPI, CAN, LIN
10) Can save multiple data formats, such as settings, waveforms, reference waveforms, CSV, pictures
11) A 3-digit digital voltage meter and a 6-digit hardware frequency indicator
12) 32 kinds of auto measurements with statistics, real-time statistics of maximum, minimum, standard deviation and etc.
13) 2 sets of digital voltmeters
14) Support threshold testing, free measurements within the screen
15) Abundant SCPI remote command control
16) USB Host/Device.
Model
1CH 25MHz waveform generator, support arbitrary waveform burst output, support modulation waveform output
32 kinds of auto measurements with statistics
Can save 10 sets of reference waveforms, CSV waveforms and settings. The USB one-click screenshot function.
2 sets of DVM, 3-digit digital voltage meter and 6-digit hardware frequency indicator functions
Serial bus trigger and decode, with the protocol monitoring function
8M memory depth, reducing waveform distortion and restore real waveforms
PASS/FAIL
Mathematical operation and FFT
X-Y format and display in dual windows
Parameters
| Model | DSO2D15 | DSO2D10 | DSO2C15 | DSO2C10 |
| Bandwidth | 150MHz | 100MHz | 150MHz | 100MHz |
| Oscilloscope channels | 2CH | 2CH | 2CH | 2CH |
| Waveform generator | 1CH | 1CH | – | – |
| Oscilloscope | ||||
| Sample rate | 1GSa/s (single channel) 500MSa/s (two channels) | |||
| Acquisition | ||||
| Normal | Sample data | |||
| Peak-to-peak value | Display high frequency and random burr | |||
| Average | Average waveform, times: 4, 8, 16, 32, 64, 128 | |||
| High resolution | Up to 12bit | |||
| Input | ||||
| Input coupling | DC, AC, GND | |||
| Input impedance | 1MΩ±2% ‖20pF±3pF | |||
| Probe attenuation factor | 1X, 10X, 100X, 1000X | |||
| Voltage rating | 300V CAT II | |||
| Maximum input voltage | 300VRMS (10X) | |||
| Horizontal | ||||
| Waveform interpolation | (sin x)/x | |||
| Maximum record length | Single channel maximum 8M | |||
| Two channels maximum 4M | ||||
| Horizontal scale range | 2ns/div~100s/div 1, 2, 5 step by step | |||
| Time base mode | Y-T, X-Y, Roll | |||
| Zero offset | ±0.5 div×minimum time base gear | |||
| Sample Rate and Delay Time Accuracy | ±25ppm | |||
| Delta Time Measurement Accuracy (Full Bandwidth)Sample Rate and Delay Time Accuracy | single-shot, Normal mode ±（1 sample interval+100ppm×reading+0.6ns） | |||
| ＞16 times averages ±（1 sample interval+100ppm×reading+0.4ns） | ||||
| Sample interval=sec/div÷200 | ||||
| Sample Rate and Delay Time Accuracy | ±50ppm（at any interval greater than 1ms） | |||
| Vertical | ||||
| Model | DSO2D15 | DSO2D10 | DSO2C15 | DSO2C10 |
| Bandwidth | 150MHz | 100MHz | 150MHz | 100MHz |
| Rising time in BNC position (typical) | 2.4ns | 3.5ns | 2.4ns | 3.5ns |
| Vertical resolution | 8 bits resolution, each channel samples simultaneously | |||
| Vertical sensitivity | 2mV/div to 10V/div | |||
| Offset range | ≥ 200mV/div, ±1V; | |||
| ＜200mV/div ±50V | ||||
| Mathematical operation | +, -, ×, ÷, FFT | |||
| FFT | Window: Rectangle, Hanning, Hamming, Blackman, Bartlett, Flattop | |||
| Bandwidth Limit | 20MHz | |||
| Bass response（-3db） | In BNC position ≤ 10Hz | |||
| Vertical gain accuracy | In ”normal” or ”average” acquisition mode, the accuracy of 10V/div to 10mV/div is ±3%; | |||
| In ”normal” or ”average” acquisition mode, the accuracy of 5mV/div to 2mV/div is ±4% | ||||
| Note: Bandwidth reduced to 6MHz when using a 1X probe | ||||
| Trigger | ||||
| Trigger type | Edge, Pulse width, Video, Slope, Overtime, Window, Pattern, Interval, Under Amp, UART, LIN, CAN, SPI, IIC | |||
| Trigger level range | ±5 divisions from the center of the screen | |||
| Trigger mode | Auto, Normal, single | |||
| Level | CH1~CH2 | ±4 divisions from the center of the screen | ||
| EXT(Only With AWG Model) | 0~3.3V | |||
| Holdoff range | 8ns~10s | |||
| Trigger level accuracy | CH1~CH2 | 0.2 div×volts/div within ±4 divisions from the center of the screen | ||
| EXT(Only With AWG Model) | ±（Set value× 6%+40mV） | |||
| Edge trigger | Slope | Rising edge, falling edge, rising or falling edge | ||
| Signal source | CH1, CH2, EXT(Only With AWG Model) | |||
| Pulse width trigger | Polarity | Positive polarity, negative polarity | ||
| Condition(When) | <, >, !=, = | |||
| Signal source | CH1~CH2, | |||
| Pulse width range | 8ns ~ 10s | |||
| Accuracy | 8ns | |||
| Video trigger | Signal standard | NTSC, PAL | ||
| Signal source | CH1~CH2 | |||
| Synchronization | Scanning line, line number, odd field, even field, all field | |||
| Slope trigger | Slope | rising, falling | ||
| Condition(When) | <, >, !=, = | |||
| Signal source | CH1 ~ CH2 | |||
| Time range | 8ns ~ 10s | |||
| Accuracy | 8ns | |||
| Overtime trigger | Signal source | CH1~CH2， | ||
| Polarity | Positive polarity, negative polarity | |||
| Time range | 8ns ~ 10s | |||
| Accuracy | 8ns | |||
| Window trigger | Signal source | CH1~CH2 | ||
| Pattern trigger | Pattern | 0: low level; 1: high level; X: ignore | ||
| Level（signal source） | CH1~CH2 | |||
| Interval trigger | Slope | rising, falling | ||
| Condition(When) | <, >, !=, = | |||
| Signal source | CH1~CH2 | |||
| Time range | 8ns ~ 10s | |||
| Accuracy | 8ns | |||
| Under Amp trigger | Polarity | Positive polarity, negative polarity | ||
| Condition(When) | <, >, !=, = | |||
| Signal source | CH1~CH2 | |||
| Time range | 8ns ~ 10s | |||
| Accuracy | 8ns | |||
| UART trigger | Condition(When) | Start, Stop, data, Parity ERR, COM ERR | ||
| Signal source(RX/TX) | CH1~CH2 | |||
| Data format | Hex (hexadecimal) | |||
| Data length | 1 byte | |||
| Data bit width | 5 bit, 6 bit, 7 bit, 8 bit | |||
| Odd-even check | none, odd, even | |||
| Idle level | high, low | |||
| Baud rate (optional) | 110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/115200/230400/380400/460400 bit/s | |||
| Baud rate(user-defined) | 300bit/s~334000bit/s | |||
| LIN trigger | Condition(When) | Interval field, synchronization field, ID field, synchronization error, identifier, ID and data | ||
| Signal source | CH1~CH2 | |||
| Data format | Hex (hexadecimal) | |||
| Baud rate (optional) | 110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/115200/230400/380400/460400 bit/s | |||
| Baud rate(user-defined) | 300bit/s~334000bit/s | |||
| CAN trigger | Condition(When) | Start bit, remote frame ID, data frame ID, frame ID, data frame data, error frame, all errors, ACK Error, overload frame | ||
| Signal source | CH1~CH2 | |||
| Data format | Hex (hexadecimal) | |||
| Baud rate (optional) | 10000, 20000, 33300, 500000, 62500, 83300, 100000, 125000, 250000, 500000, 800000, 1000000 | |||
| Baud rate(user-defined) | 5kbit/s~1Mbit/s | |||
| SPI trigger | Signal source | CH1~CH2 | ||
| Data format | Hex (hexadecimal) | |||
| Data bit width | 4, 8, 16, 24, 32 | |||
| IIC trigger | Signal source (SDA/SCL) | CH1~CH2 | ||
| Data format | Hex (hexadecimal) | |||
| Data index | 0~7 | |||
| When(condition) | Start bit, stop bit, No Ack, address, restart, address and data | |||
| Measurement | ||||
| Cursor | Voltage difference between cursors △V | |||
| Time difference between cursors △T | ||||
| Reciprocal of △T, in Hertz (1/△T) | ||||
| Auto measurement | frequency, period, mean, peak-to-peak, RMS, minimum, mixmum, rising time, falling time, + width, – width, base, top, middle, amplitude, overshoot, preshoot, rising edge phase difference, falling edge phase difference, + duty, – duty, period mean, PRMS, FOVshoot, ROVshoot, BWIDTH, FRF, FFR, LRR, LRF, LFR, LFF | |||
| DVM | Data source | CH1, CH2 | ||
| Measurement type | DC RMS | |||
| AC RMS | ||||
| DC | ||||
| Frequency meter | hardware 6 bits frequency meter | |||
| Arbitrary waveform generator | ||||
| Channel | 1 | |||
| Sample rate | 200MSa/s | |||
| Vertical resolution | 12 bits | |||
| Maximum frequency | 25 MHz | |||
| Standard waveforms | sine, square, ramp,Exp, noise, DC | |||
| Arbitrary waveform | Arb1, Arb2, Arb3, Arb4 | |||
| Sin | Frequency range | 0.1Hz~25MHz | ||
| Square/pulse | Frequency range | 0.1Hz~10MHz | ||
| Triangular wave | Frequency range | 0.1Hz~1MHz | ||
| Sampling wave | Frequency range | 0.1Hz~1MHz | ||
| Index | Frequency range | 0.1Hz~5MHz | ||
| Noise | ||||
| Arb1 | Frequency range | 0.1 Hz to 10 MHz | ||
| Arb2 | Frequency range | 0.1 Hz to 10 MHz | ||
| Arb3 | Frequency range | 0.1 Hz to 10 MHz | ||
| Arb4 | Frequency range | 0.1 Hz to 10 MHz | ||
| Waveform length | 4KSa | |||
| Frequency | Accuracy | 100 ppm (<10 kHz) 50 ppm (>10 kHz) | ||
| Resolution | 0.1 Hz or 4 bits，take the greater one | |||
| Amplitude | Output range | 10mV~7Vp-p (high impedance) | ||
| 5mV~3.5Vp-p (50Ω) | ||||
| DC offset | Range | ±3.5 V, high impedance | ||
| ±1.75 V, 50 Ω | ||||
| Resolution | 100 μV or 3 bits, take the greater one | |||
| Accuracy | 2% (1 kHz) | |||
| Output impedance | 50 Ω | |||
| General specifications | ||||
| Display | Display type | 7” diagonal TFT liquid crystal | ||
| Display resolution | 800 (horizontal)*480 (vertical) pixels | |||
| Display colour | 16 million colours (24 bits true colour) | |||
| Persistence time | minimum, 1 s, 5 s, 10 s, 30 s, infinite | |||
| Display type | dot, vector | |||
| Display brightness | adjustable | |||
| Grid type | adjustable | |||
| Grid brightness | adjustable | |||
| Interface | Standard interface | USB Host，USB Device | ||
| General specifications | Probe compensator output | |||
| Output voltage, typical | about 2Vpp input ≥1MΩ load | |||
| Frequency, typical | 1kHz | |||
| Power supply | 100-120VACRMS(±10%), 45Hzto 440Hz, CATⅡ | |||
| 120-240VACRMS(±10%), 45Hz to 66Hz, CATⅡ | ||||
| Power consumption | <30W | |||
| Fuse | T, 3.15A, 250V, 5x20mm | |||
| Operating temperature | 0~50 °C (32~122 °F) | |||
| Storage temperature | -40~+71 °C (-40~159.8 °F) | |||
| Humidity | ≤+104℉(≤+40°C): ≤90% relative humidity | |||
| 106℉~122℉ (+41°C ~50°C): ≤60% relative humidity | ||||
| Altitude | Operating and nonoperating | 3, 000m (10, 000 feet) | ||
| Mechanical shock | Random vibration | 0.31 g RMS from 50Hz to 500Hz, | ||
| 10 minutes on each axis | ||||
| Nonoperating | 2.46g RMS from 5Hz to 500Hz, | |||
| 10 minutes on each axis | ||||
| Operating | 50g, 11ms, half-sine wave | |||
| Mechanical | Size | 318 x 110 x 150mm (length x width x height) | ||
| Weight | 1900g | |||
